Conventional Building Fire Alarm System

Key Specifications/Special Features

• Four Style B (Class B) Initiating Device Circuits (IDCs).
• All zones accept two-wire smoke detectors and each zones accept Max.25 normally-open contact devices.
• One built-in, Style Y (Class B) Notification Appliance (Signal) Circuits (NACs).
• Alarm, Trouble and Supervisory, Form-C relays standard.
• 24-volt operation.
• Resettable four-wire smoke detector power  500 mA.
• Non-resettable power  500 mA.
• One-man walk-test programmable for silent or audible test.
• Disable/Enable control per IDC.
• Reverse polarity protection.

General composition of automatic fire alarm system: smoke detectors, heat detectors, manual pull stations, audible warning devices, and a fire alarm control with remote notification capability to provide early warning of a developing fire. 

Product Description

• CK1000 4-zones Fire Alarm Control Panel uses conventional input devices. It accepts water flow devices, two wire smoke detectors, pull stations and other normally-open contact devices. Outputs include one Notification Appliance Circuits(Sounder 1), three standard For-A relays (alarm, trouble and supervisory) and an EIA-485 port to interface with remote annunciators and optional remote relay modules.  It is field programmable via the panel keypad. It also supervises all wireing, AC voltage and battery level. 
• The control panel is a 24 volt, Class B, Conventional Fire Alarm Control Panel.  It is designed exclusively to meet the lastest market requirements and future ULC codes, the highly const-effective series.  It can be used in a variety of low to mid sized applications. 

Installation Guidelines:

            All wiring must be installed in compliance with the National Electrical Code, applicable state and local codes, and any special requirements of the local Authority Haveing Jurisdiction. 

Technical Specifications

• AC POWER: 220VAC, 50Hz
• Battery: Sealed Lead-acid batteries only. Maximum charging circuit: 27.6VDC  .8amp for normal flat charge. Maximum battery charger capacity: 18AH battery.  Two 10AH batteries can be boused in the cabinet. Larger batteries require a separate battery box. 
• Total DC 24V system power: 3.0amps.
• Maximum current per NAC: 1.25amps.
• Maximum battery charging capability: 18AH
• Resettable four wire smoke detector power output. 
• Non-resettable power output.
• Integral Form-A alarm, trouble and supervisory relays, rated at 2.0amps  0VDC (resistive), 2.0amps 30VAC (resistive)